explain this procedure. Cord set three wire to a four wire. It needs to be grounded on something metal, like the body of the dryer. If you did wire a dryer to a 120v plug most likely the dryer would work but provide very small amount of heat. Might just say it in watts. 5 Insert new cord in wire clamp.
Because the ground is missing in a three prong, the appliance uses a ground strap off the neutral if the ground wire. Dryer plug three to four Yes this is possible and for safety's sake highly recommended. Instructions should come with the new cord. Put the three prong outlet back and install a new three -prong cord on the dryer. As it sits, without any ground to the dryer, there is no way for a ground fault on the dryer (inadvertent connection of a hot wire to the frame of the dryer ) to trip the dryer breaker.
Connect the green ground wire directly to the chassis of the sryer using a convienent screw. Back feeding a house when there is a power outage can re energize the primary voltage lines that utility workmen might be working. If when you look into the box and there is only a three wire and no ground in the existing cable, a new cable from the panel to the dryer receptacle will have to be installed or a insulated ground wire has to be installed. Please check the power draw of the drier (in amps it might say that on adult dating in Bournemouth a sticker on the back, and multiply that by 240V, which will give you Watts, like in a light bulb. Open up the electrical access panel on the back of the range. A red and black and white are now connected to the terminal strip. The link below might enlighten you further on this matter. This is the attachment point for the fourth green ground wire from the new dryer cord assembly.
Free hookup sites without paying
Sacramento hookup spots
Best nearby hookup app